Vape coils are essential components of any vaping device, responsible for heating your e-liquid and turning it into vapor. However, coils don’t last forever and need replacing when they burn out or become inefficient. For frequent vapers, replacing coils can add up in cost and become an inconvenience. Fortunately, with proper care and maintenance, you can extend the life of your vape coils and enjoy a smoother, more flavorful vaping experience.

Here are five easy ways to maximize the lifespan of your vape coils.

1. Prime Your Coils Before Using Them

Priming your coils is one of the most crucial steps to ensure longevity. Skipping this step can lead to dry hits, burning the cotton wick inside the coil and rendering it useless. Priming involves saturating the wick with e-liquid before using the coil for the first time.

How to Prime a Coil Properly:

•Remove the coil from its packaging.

•Drip a few drops of e-liquid directly onto the exposed cotton in the coil.

•Fill your tank with e-liquid and install the coil.

•Let the tank sit for at least 10–15 minutes to allow the wick to absorb the liquid fully.

•Start vaping at a lower wattage and gradually increase it to your desired setting.

This process ensures the cotton inside the coil is fully saturated, preventing it from burning prematurely.

2. Avoid Chain Vaping

Chain vaping—taking multiple puffs in quick succession—can quickly wear out your coils. When you vape repeatedly without allowing the wick to re-saturate, it can dry out, leading to burnt hits and coil damage.

To avoid this, give your device a few seconds between puffs. This pause allows the wick to absorb more e-liquid and keeps the coil from overheating. If you’re someone who enjoys frequent vaping sessions, consider using a higher-resistance coil or an e-liquid with a higher VG ratio, as these tend to last longer with continuous use.

3. Use the Right Wattage Settings

Every coil comes with a recommended wattage range, which is usually printed on the coil itself or specified by the manufacturer. Using wattage outside this range can cause the coil to overheat or fail prematurely.

Why Wattage Matters:

•Too low: The coil may not produce enough heat to vaporize the e-liquid effectively, leading to flooding and poor performance.

•Too high: Excessive heat can burn the wick and damage the coil.

Make sure your vaping device is set within the recommended wattage range for your coil. If you’re unsure, consult the user manual or check the specifications online. Staying within the proper wattage will not only extend the life of your coil but also enhance your vaping experience.

4. Choose the Right E-Liquid

The type of e-liquid you use can significantly impact the lifespan of your vape coils. Some e-liquids are more “coil-friendly” than others.

Factors to Consider When Choosing E-Liquid:

•Sweeteners: E-liquids with high amounts of sweeteners can leave residue on your coils, leading to gunk build-up and reduced performance. Opt for less sweet or unsweetened e-liquids when possible.

•VG/PG Ratio: High-VG e-liquids (vegetable glycerin) are thicker and can cause faster coil degradation in devices not designed for sub-ohm vaping. If you’re using a standard coil, go for a balanced VG/PG ratio, such as 50/50 or 70/30.

•Quality: Cheap or low-quality e-liquids may contain impurities that can damage your coils over time. Invest in premium e-liquids from reputable brands for better performance and longevity.

By choosing the right e-liquid, you’ll reduce gunk build-up and improve your coil’s durability.

5. Regularly Clean Your Coils

Cleaning your coils is an excellent way to extend their lifespan and improve performance. While cleaning won’t restore a completely burnt-out coil, it can help remove residue and extend the life of coils that are starting to degrade.

How to Clean Your Coils:

1.Remove the Coil: Take the coil out of your device or tank.

2.Rinse with Warm Water: Hold the coil under warm running water to remove excess e-liquid and residue.

3.Soak in Cleaning Solution: Soak the coil in a bowl of warm water, vinegar, or a specialized cleaning solution for about 20–30 minutes.

4.Rinse Again: Rinse the coil thoroughly with warm water to remove any remaining residue or cleaning solution.

5.Air Dry: Let the coil air dry completely before re-installing it in your device.

Cleaning your coils once every week or two can help remove gunk build-up and improve performance, giving your coils a second life.

Bonus Tip: Monitor E-Liquid Levels

Running your device with an empty tank—or letting the e-liquid drop below the coil’s level—can burn the wick and damage your coil. Always keep an eye on your e-liquid levels and refill your tank before it runs dry.

When to Replace a Coil

Even with proper maintenance, vape coils will eventually need to be replaced. Here are some signs it’s time to swap out your coil:

•Burnt Taste: A burnt or unpleasant taste is a clear indicator that your coil is damaged.

•Reduced Vapor Production: If your device isn’t producing as much vapor as it used to, your coil may be nearing the end of its life.

•Gurgling Sounds: Gurgling noises can signal a flooded coil or one that’s no longer functioning properly.

•E-Liquid Leakage: A damaged coil can cause your tank to leak e-liquid.

Most coils last anywhere from 1 to 2 weeks, depending on your usage and maintenance habits.

Conclusion

By following these five easy tips, you can extend the life of your vape coils, save money, and enjoy a more consistent vaping experience. From priming your coils properly to cleaning them regularly, small changes in your routine can make a big difference.

At Bellagio Smoke & Vape, we’re here to help you get the most out of your vaping gear. Whether you need high-quality coils, e-liquids, or expert advice, our team is always ready to assist. Visit our store or check out our online selection for all your vaping needs!