Whether you’re a seasoned vaper or just starting, creating thick, dense clouds is often one of the most satisfying aspects of vaping. Achieving massive vapor clouds requires more than just a high-powered device—it involves a balance of several factors that work together. If you’re looking to level up your cloud-chasing skills, Bellagio Smoke & Vape is here to guide you. In this post, we’re covering the 10 essential tips that will help you perfect your vape clouds and take your experience to new heights.

1. Choose the Right Device for Cloud Chasing

The first step in creating big vape clouds is selecting the right device. Cloud production is largely dependent on the power of your device. Vape mods, especially high-wattage mods, are your best bet for achieving large vapor clouds. These devices allow you to control the wattage, which directly impacts the amount of vapor produced. Look for mods that can handle wattages of 80W or more for cloud chasing, and ensure that the device can handle sub-ohm tanks.

Sub-ohm tanks are particularly important when it comes to cloud chasing. These tanks are designed with coils that have a resistance of less than one ohm, allowing more power to flow through them, which generates more vapor. At Bellagio Smoke & Vape, we carry a wide range of high-performance mods and tanks that are perfect for cloud production. Our knowledgeable staff is available to help you choose the right setup based on your preferences.

2. Opt for High VG E-Liquids

The type of e-liquid you use plays a major role in vapor production. E-liquids come with different ratios of vegetable glycerin (VG) and propylene glycol (PG), which affect both the vapor and throat hit. To create the densest clouds, you’ll want to opt for e-liquids that have a higher VG ratio. VG is thicker than PG, and its viscous nature results in larger vapor clouds.

A good starting point is to look for e-liquids with a VG/PG ratio of 70/30 or higher. This higher VG concentration will allow you to create bigger, thicker clouds. Bellagio Smoke & Vape offers a wide selection of premium e-liquids with varying VG/PG ratios, ensuring you’ll find the perfect juice for your cloud-chasing needs. Whether you prefer fruity flavors or something more exotic, we have options to suit every taste.

3. Increase Your Wattage

When it comes to cloud chasing, more wattage usually equals more vapor. Increasing the wattage of your device allows more power to be delivered to the coil, resulting in hotter vapor and more substantial clouds. Be sure to adjust your wattage based on the resistance of your coil and the type of e-liquid you’re using. For example, a sub-ohm tank will require higher wattage to produce the best clouds.

If you’re using a coil with a lower resistance, such as a 0.2-ohm coil, you’ll want to increase your wattage to around 50-80W. This will ensure that the coil is heated enough to vaporize the e-liquid efficiently. However, be cautious not to exceed the recommended wattage for your coil to avoid damaging it. At Bellagio Smoke & Vape, we offer a wide range of devices with adjustable wattage settings to help you find the perfect output for cloud chasing.

4. Use a Wide-Bore Drip Tip

The type of drip tip you use can also affect your cloud production. A wide-bore drip tip allows air to flow through more easily, which helps produce larger vapor clouds. Narrower drip tips tend to restrict airflow, limiting the amount of vapor you can inhale. When cloud chasing, a wide-bore drip tip will give you the best results by allowing for smoother, unrestricted airflow and increased vapor volume.

Bellagio Smoke & Vape carries a variety of wide-bore drip tips designed to maximize vapor production. If you’re not sure which drip tip works best with your current setup, stop by our store, and our staff can help you choose the perfect one.

5. Experiment with Temperature Control

Temperature control (TC) is another feature available on many advanced vape mods that can help enhance vapor production. By adjusting the temperature of your coil, you can achieve more consistent vapor, which helps you create larger, denser clouds. Temperature control allows you to set the precise temperature for your coil, reducing the chances of dry hits and ensuring smooth, satisfying vapor.

Mods with temperature control allow you to experiment with different heat settings to see what works best for your coil and e-liquid. Start by setting your temperature to around 400°F and adjust from there. This will help you fine-tune your cloud production without going overboard. If you’re new to TC vaping, stop by Bellagio Smoke & Vape, where our knowledgeable staff can walk you through the process.

6. Maintain Your Coils Regularly

Regular coil maintenance is essential for optimal performance and cloud production. Over time, coils can get gunked up with e-liquid residue, which affects the flow of vapor. If you notice a decline in cloud production, it may be time to clean or replace your coil. Neglecting coil maintenance can result in a burnt taste and diminished clouds.

To maintain your coils, make sure to regularly clean them with warm water and a cotton swab to remove any residue. If your coils are showing signs of wear or the flavor has gone bad, replace them to ensure the best cloud production. At Bellagio Smoke & Vape, we offer a wide range of replacement coils to suit different tanks and devices, so you can keep your setup in top condition.

7. Inhale Slowly and Steadily

While it’s tempting to take a huge, quick hit to create massive clouds, this can actually reduce the amount of vapor you inhale. To create thick, dense clouds, inhale slowly and steadily. This allows the vapor to accumulate in the chamber and gives your device time to heat up the e-liquid properly. A slow, controlled inhale is more effective for producing dense vapor compared to a rushed, fast inhale.

Take your time, and don’t rush the process. A steady inhale will give you the best results, allowing the vapor to build up and create a more substantial cloud.

8. Adjust Your Airflow for Maximum Vapor

Airflow plays a significant role in cloud production. The more airflow you have, the more vapor your device will produce. When cloud chasing, it’s essential to adjust your device’s airflow settings to allow for maximum vapor production. Many tanks come with adjustable airflow, and by opening it up, you can allow more air to pass through the coil, which helps create larger clouds.

Experiment with the airflow settings to find the right balance between vapor production and flavor. If you open the airflow too much, you might experience a loss in flavor, so it’s essential to find the sweet spot that gives you both thick clouds and a great taste. Bellagio Smoke & Vape offers several tanks with adjustable airflow to help you customize your vaping experience.

9. Stay Hydrated for Better Cloud Production

Believe it or not, staying hydrated can improve your vaping experience. Vaping can cause dehydration, as the act of inhaling and exhaling vapor may dry out your throat and mouth. When you’re well-hydrated, your mouth and throat are better able to handle the vapor, which leads to more enjoyable and smoother hits.

To get the most out of your cloud-chasing experience, make sure to drink plenty of water throughout the day. This will help keep your mouth moist and your vaping experience pleasant, so you can enjoy your clouds without discomfort.

10. Experiment and Have Fun!

The most important tip for cloud chasing is to have fun with it! Vaping is a personal experience, and it may take some trial and error to find the perfect setup that works for you. Don’t be afraid to experiment with different mods, tanks, coils, and e-liquids until you find what produces the best clouds for you. Each vaper has their own unique preferences, and exploring different combinations is part of the fun.

At Bellagio Smoke & Vape, we encourage you to experiment with our wide selection of vape devices, e-liquids, and accessories. Our expert staff is always available to provide advice and help you make the most of your cloud-chasing journey.

Conclusion

Perfecting your vape clouds is an exciting process that requires the right equipment, the right e-liquids, and a little experimentation. By following these 10 essential tips, you can take your cloud-chasing to new heights and enjoy a richer, more satisfying vaping experience. Whether you’re just starting out or you’re an experienced vaper looking to level up, Bellagio Smoke & Vape has everything you need to create the perfect clouds.

Visit us today to explore our wide range of devices, e-liquids, and accessories designed to enhance your vaping experience. Our knowledgeable staff is here to guide you every step of the way—come in, ask questions, and find the setup that’s perfect for you!